Видео

.... I took off the box on a 2013 Camry And I couldn't find any restriction

Thank you sir , helped me out with my car 9 years later

I've got one it's about 7 months old and the battery is leaking and it won't charge

I know I’m late to the vid but how fast does it go with the new motor?

Cushions are needed but they are little stiff/thick. Bad supplier control.

You made that look so easy 😂, ill be replacing these speakers soon. They dont even work any more. Perhaps its just the head unit that going. It deserves new speakers anyway. Cheers!

I have used just about every tool brand under the sun and have found great ryobi tools and terrible Milwaukee or DeWalt tools. I personally think that dewalt makes the best benchtop plane you can get for the price and even more so if you swap the head for a helix cutting head. But as far as cordless powertools I have seen and personally had more issues with dewalt than any other brand..

Have gotten rid of almost all my DeWalt tools. Been highly satisfied with Milwaukee quality and their huge selection of tools.

DeWalt is terrible. Milwaukee is the way to go.

Cushion pads to avoid vibration break the plastic cover. Maybe you removed the cracking noise but later you will find a crack in the cover

I have a follow up fix to the issue. Check my videos, it’s a short

over all what is yr best pick?

Great video, what program are you using that shows the schematics?

Большое спасибо что показали внутренности 👍👍👍👍

My question concerning the feeler gauge movement in the rocker arm: how do you determine what is too loose if there is space for wiggle room anyway?

AT 80,000 mile my 2015 Accord started leaking around the valve cover. I had to replace a sticking PCV valve which was causing the problem. When the PCV goes out pressure builds and causes the leak.

They are expecting you to take it to the dealership and have it changed by them for $200

I'm having issues with the dab radio signal which is apparently an issue with this model. Do you think it's possible to upgrade the antenna, maybe fit an external antenna in the slot on the side which would give the antenna some protection?

My only gripe with the tool is its price. Yes, it's faster than than Milwaukee but not worth the price hike. I'll stick with my dcf 850.

I noticed that you jacked your car up from the engine. That’s the proper way to do it! Also, I see that you use Honda genuine parts! That’s generally the most ideal way to do it!

Heavier? It’s like 3 pounds ? 🐱

@ 07:56. While I applaud your ingenuity, and ideas, and think it might actually be a cool feature, but in the end, not easy to do, and not practical in the long run. Maybe You can come up with something, Patent it, and then make money off whomever brings it to the market? Hmmm… I like the newer style batteries, with the rubber moulding on them, but geesh DeWalt, would it kill ya to make a DAMN 4 segment, or even better, 5 segment battery check!?! The white lights are easy to see out in bright Sunlight, but the silly 3 segment is like DATED! Come on DeWalt !!!

Return it, Simple as that, but good luck dealing with Acme!

Hmmm, seems like a pretty huge job. Thanks for being the guinea pig for us.

A lot of bitching and moaning need more lights more light, oh batteries so heavy. But I need more power. I’m not even a Dewalt fan if it was made in America, it would’ve been even more expensive because somebody has to pay for employee insurance! That’s why I stick with my Milwaukee, precise and compact

The battery with a Base LIGHT NICE

If it's got a defect take it back get another, mine was fine and works fabulous getting another for the shop

Mine was great did a live UNBOXING with it and i THINKING about Turning it into a 3/8 ANVIL in and getting another one just have to do my RESEARCH i get BORED FAST and it has CO$T me about $10.000 in Cordless power tools and OPE

A lot of people say It tends to automatically switch to lower speed mid way when driving large fastener. Can you test to see if it does that?

tighten the screws

That doesn't qualify as a defect

mine came out of the box with the gap too!!! im so glad it wasnt just me lol its been driving me crazy

Hi , may i know how much is the brakes and rotors cost to complete the job

I prefer Honda GX 200 engines I am not a fan of the Predator just my personal preference. I have an older Kawasaki FR 691V on my older mower. I have been tempted to try and put it on a Mini-Bike ha ha! I am afraid it will stick out the sides too much though.

May I know how to identify the common wire?

Thanks for the walkthrough , full of valuable information

How much can one get these cars now?

You should see the Cummins oil filter it’s in an even worse location

TY, who knew? Not me

What a tiny oil filter. I remember them being bigger on the 3rd gen

My Goodman doesn’t have a capacitor connected to the blower, should I be concerned or is that typical normal? So far I haven’t noticed anything else with my unit.

For gods sake people. If you take your time and give the filter time to drain bit by bit as you remove it! You don’t get oil all over the place or on any part of the truck. As for the sway bar or cross member big deal, it cleans right off.

My 2015 Honda accord exl was totaled & fixed almost back to new. I don’t have the intake resonator on due to reconstruction. It can’t fit now. Is my car still fine to drive? The air box filter is on but the circle part is open. Do I need to close it? Also I can’t find the name of the ac line with the blue cap.

I totally agree with you. This is the absolutely worse vehicle to change oil in I have ever had. Just did it yesterday 2019 Ram Longhorn 1500. I did manage to fill the filter up with oil and get it back up there without spilling it but it sure sucks to take it off. Thank you for the video and your patience. Take care and enjoy your Ram

where u gona rising mount

Great video. Very well done and thoroughly helpful. Thank you.

Great video. Mine's the 3.6L and it isn't much easier (except the filter...maybe). The filter location on the V6 is directly to the left of the oil fill neck but under a plastic cover (because why not). At least we all lube our sway bars every 5k miles or so.

To the point and informative with classy articulation. What more is there to like ? The flex tools!

Thanks!

Does it matter where you connect each of the brown cables or are they both the same?